|
MLCS 200 Solid Carbide Spiral Upcut Bit Starter Set, 3-Piece
|
MSRP: $99.95
Your Price: $69.95
Savings: $ 30.00 ( 30% )
Shipping: Usually ships in 24 hours
Manufacturer: MLCS
Prices subject to change. Please verify price during checkout.
|
|
MLCS 200 Solid Carbide Spiral Upcut Bit Starter Set, 3-Piece Features
|
Solid micro grain carbide cuts smooth and stays sharp.
3 popular sizes included: 1/4-Inch, 3/8-Inch, 1/2-Inch diameter
Perfect for deep mortises and cutting dadoes in a router table.
Remove sawdust and wood chips from plunge cuts with upward shearing.
1/4-Inch and 1/2-Inch shanks.
|
|
|
|
|
|
Additional MLCS 200 Solid Carbide Spiral Upcut Bit Starter Set, 3-Piece Information
|
Three SOLID MICROGRAIN CARBIDE bits for fast, smooth cuts and an edge that stays sharp longer. Spiral Bits produce a very clean and accurate cut with minimal chatter. Upcut spiral helps remove material from the groove. They work well for deep mortises, cutting dadoes in a router table, and any edge treatment done with the work facing upward. Includes the following diameter UPCUT Bits: 1/4" D (1" Cutting Length, 1/4" Shank), 1/2" D (1-1/2" Cutting Length, 1/2" Shank), and 3/8" D (1-1/4" Cutting Length, 1/2" Shank).
|
|
|
What Customers Say About MLCS 200 Solid Carbide Spiral Upcut Bit Starter Set, 3-Piece:
|
|
Well, this kit is a great spiral starter kit. MLCS bits that I have to date have been excellent. I have used each of these bits for grooves and mortises on several projects now. No complaints and I would recommend.
Set arrived from Amazon fast, intact and complete. Bits cut very well, found out how fragile solid carbide in general really is. I goofed and broke the 1/4" diameter bit. That was my fault.
|
|
 |
|
|
